ASC Tradex

Nitoflor Hardtop surface hardening compound is a quality controlled, factory blended powder which is ready to use on site. It consists of special hard wearing aggregates selected for their physical properties of abrasion and wear resistance, Portland cement and special additives to improve workability. This combination produces a material which is easy to trowel in the surface of fresh, wet concrete. Nitoflor Hardtop cures monolithically to provide a dense, non porous surface which is extremely hard wearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin ('granolithic') screeds, e.g. curling, shrinkage, cracking, etc. are completely overcome.

• Supplied ready to use - no additives required.
• Provides a hard, abrasion resistant surface.
• Forms monolithic bond with fresh concrete base.
• Hard, dense surface resistant to oils and grease.
• Available in a range of colours to improve working environment.
• Non-metallic aggregate - will not rust when wet.

• Provides a hard, abrasion resistant surface
• Forms monolithic bond with base concrete
• Easy and economical to apply

Additional Information:

• Item Code: 1853120

Nitoflor Hardtop surface hardening compound is a quality controlled, factory blended powder which is ready to use on site. It consists of special hard wearing aggregates selected for their physical properties of abrasion and wear resistance, Portland cement and special additives to improve workability. This combination produces a material which is easy to trowel in the surface of fresh, wet concrete. Nitoflor Hardtop cures monolithically to provide a dense, non porous surface which is extremely hard wearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin ('granolithic') screeds, e.g. curling, shrinkage, cracking, etc. are completely overcome.

Supplied ready to use - no additives required.

Provides a hard, abrasion resistant surface.

Forms monolithic bond with fresh concrete base.

Hard, dense surface resistant to oils and grease.

Available in a range of colours to improve working environment.

Non-metallic aggregate - will not rust when wet.

Description:

Brushcrete is a single component acrylic based polymer when blended with cement forms a composite polymer modified cementitious waterproofi ng system, when used in conjunction with fi bre mesh forms a tough hard wearing surface.

Advantage:

• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Develops excellent bond to most building materials.
• Improves mechanical & physical properties of the coating system when used in conjunction with cement.
• Reduces or prevents salt penetration into concrete.
• Resistance to ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
• Is highly impermeable in continuous wet condition.
• Is non-flammable and does not give off toxic gases, when exposed to fire.
• Non toxic

• Penetrates concrete seals capillary tracts
• Contains no chloride
• Easy to apply

Additional Information:

• Item Code: 1037502

Cemtop 250T provides a self levelling, cementitous underlay for a wide variety of floor finishes which require a smooth level substrate. 

• Self levelling: Fluid consistency ensures product levels out on pouring to a smooth even surface.
• Eliminates screeding: Can be used directly onto in situ or pre-cast floors to provide smooth level surface without screeding.
• Excellent bonding: Polymer modified formulation ensures excellent adhesion to prepared substrates.
• Time saving: Quick easy laying and fast hardening.
• Ready to use: One pack product which is simply mixed with water on site.
• Self curing: No fear for premature drying.

Renderoc S2 is supplied as a grey powder along with a liquid polymer and has to be mixed with water on site to produce a highly consistent, high strength repair mortar. The material is based on carefully blended cement, graded fillers and chemical additives and is polymer modified to provide a mortar with good handling characteristics, while minimising water demand. The hardened product exhibits excellent thermal compatibility with concrete and outstanding water requirement ensures fast strength gain and long-term durability.

• High strength
• Can be applied by hand, like conventional mortars
• Extremely low permeability provides maximum protection against carbon dioxide and chlorides
• Excellent bond to the concrete substrate
• Shrinkage compensated
• No site batching required, supplied in pre-weighed prepacked condition
• Only addition of water at site to be made while mixing the powder and liquid parts
• Contains no chlorides.

Additional Information:

• Item Code: 2234000

Conbextra EP10 is an epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN 1504-6 Anchoring of reinforcing steel bar.
It is used for grouting of gap thicknesses from 0.25 to 10 mm under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical spillage may occur. .
Advantages:

Low creep characteristics under sustained loading

Resistant to repetitive dynamic loads

Non-shrink, ensuring complete surface contact and bond

High compressive, tensile and flexural strengths

Fast, convenient installation with rapid strength gain

Withstands a wide range of chemicals

Clients can avail from us an extensive array of Conbextra EP10. The offered product is used for filling cracks in brickwork at construction sites. This product is processed using quality tested chemicals by a team of skilled professionals at vendor's end. Our offered range of chemical is available in varied quantities at market leading prices.

Features:

Provide smooth surface

Non-hazardous

Having high bond strength

Additional Information:

• Item Code: 1158002

Description:

Conbextra AT is a ready to use dry powder supplied in 25kg bags. Conbextra AT has been formulated specifically for grouting of bridge bearings and parapet post base plates. The addition of a controlled amount of clean water produces a free-flowing grout with high early and ultimate strengths as well as long term durability, suitable for use in section thicknesses 10mm to 100mm. Thicker sections can be achieved by incorporating clean, dry 10mm aggregate.

• Non-shrink
• High early and ultimate compressive strengths
• Good flow
• Low permeability ensures durability
• Can be poured or pumped

Conbextra GP1 is a non-shrink, free-flow, high strength cementitious grout. Machine base plate grouting - turbines, generators, pumps, presses, steel rolling beds, production machinery and crane rails. Construction grouting - stanchions, coloumns, beams, bolt pockets, keyways and anchors0. Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.

High early and ultimate strength Free Flow Shrinkage compensation in plastic state Non metallic iron content Prepacked material

Advantages

• Non-shrink - Will continue to occupy the filled space without shrinkage. Continues to provide support to the bearing areas and dampens vibration.
• Free flow - Ensures high level of contact with load bearing area. Also helps complete filling without voids. No need for external aids like rodding, poking, chaining etc.
• Pre-packed and factory controlled - Consistency and reliability ensured. Site batching and blending variations eliminated.
• Iron free - No chance of deterioration by uncontrolled rust expansion, corrosion and staining of grout.
• Chloride free - Does not cause corrosion of machine parts, anchor bolts etc., in contact with grout.

• Lokfix is a two component polyester anchoring grout supplied in pre-measured quantities.
• The material cures quickly to give consistent, high performance anchorages.
• Version: Lokfix S25 - Blue lid
• Pourable grade, 25 minute gel time at 20°C for use in vertical down holes where the hole is 8 to 40 mm greater in diameter than the bar.

Advantages:

• Easy to mix and apply
• Rapid strength gain
• Vibration resistant
• Corrosion resistant
• Non-expansive
• Can be placed underwater
• Increased flowability
• Two grades specifically for vertical and horizontal / overhead use

Disclaimer: All visual elements of a product like color, texture, finish, pattern, design, shape, size, dimension and other such, as listed and displayed on www.buildmantra.com via image(s) and other multi-media content may differ from the actual due to variances in the type and quality of user's viewing screen/display monitor.

All product data provided on www.buildmantra.com are for knowledge purposes only. It is liable upon all those who use, handle or install any product listed on www.buildmantra.com to adopt safe product handling practices. Build Mantra is not liable for any injury /damage to any person /property /object /entity caused by the performance or non-performance of any product listed on www.buildmantra.com..

• Lokfix S: 0.5 liter
• The pack consists of a can of resin and a plastic bag of hardener contained in a plastic mixing pail with a snap-on lid.
• Store in accordance with the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972.
• Shelf life of 12 months at 20°C will be reduced at higher temperatures.

Uses

• Lokfix mix and place anchoring grouts are used for anchoring of steel bars into concrete, brickwork, masonry and rock.
• Recommended applications include:
• Installation of starter bars
• Base plate bolts
• MOT Bolts
• Installation of balustrades
• Installation of barriers and safety fences
• Installation of tie bars

• Store in accordance with the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972.
• Shelf life of 12 months at 20°C will be reduced at higher temperatures.

• Lokfix S25
• Using the calculated volume of grout based on the estimating guide table, the grout should be poured steadily into the prepared holes.
• The anchor bar is then pressed into the hole to the required depth; slight agitation will assist in achieving a complete bond.
• The bar should be left undisturbed in the required position until the resin is set.

Additional Information:

• Item Code: 1667000

• Excellent bond to the concrete substrate
• Shrinkage compensated
• Only addition to water at site to be made while mixing the powder and liquid parts

Additional Information:

• Item Code: 2199000

Fosroc Thioflex 600 two-part polysulphide sealant is available in two grades: gun grade and pouring grade.

It is ideal for heavily trafficked floor joints, sealing movement joints in building and civil engineering structures, including superstructures, basements and subways.

Thioflex 600 gun grade is suitable for general application. Packed in a 2.5 litre tin containing the base and curing agent, it is ready to mix in the appropriate ratios. Thioflex 600 polysulphide mastic sealant is highly recommended for use in buildings that are high rise and other applications where access for subsequent maintenance will be difficult with the risk of early movement failure being minimised. It's also perfect for sealing joints in brickwork, retaining walls, basements and subway on both new builds and remedial locations.

Thioflex 600 pouring grade is supplied in a 5 litre tin, with curing agent included in a sachet inside the tin.  It is recommended for initial sealing of expansion joints and stress relief joints in floors and sealing other horizontal surfaces.

• Forms a tough, elastic rubber like seal
• Accommodates continuous and cyclic movement 
• Excellent adhesion to most common substrates
• High resistance to ageing, reduces physical damages due to climatic extremes

• 2.5 Ltr
• 3.95 kgs

Additional Information:

• Item Code: 2486200

Renderoc HSXtra is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent repair mortar suitable for structural concrete and masonry repairs. Renderoc HSXtra may be hand applied or sprayed with suitable equipment, please see application method statement for details.
Renderoc HSXtra features Dimensional Stability Technology - a new materials technology which controls the rate of drying shrinkage such that, when used correctly:
i. The dimensions of the repair remain stable; and thus
ii. Eliminating failure, due to shrinkage cracking.

This in turn leads to a series of associated benefits:

Cost effective - shrinkage control enables repairs to be completed ‘right first time’.

Enhanced durability – works in tandem with extremely low permeability to prolong effective working life.

Compatibility – aligns performance closer than ever before, to that of host concrete.

User friendly – specifically developed to provide an easy-to-apply product, suitable for local conditions.

Definable performance – positive benefits are easily demonstrated via a single, simple measurement.

With the track of the recent developments in the pharmaceutical industry, we are presenting a qualitative assortment of Nitocote EP 405 Silver Grey. It is based on epoxy-polyamide resins and MIO specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces. It cures to form a smooth fi lm of 80 microns DFT, with good resistance to a wide range of chemicals and ultraviolet light.

Features:

Smooth, glossy, easy to clean surface

Corrosion, chemical, and abrasion resistant

Can be applied to damp surfaces

Additional Information:

• Item Code: 1754302

Nitobond SBR is a polymer bonding aid and mortar additive. Supplied as a ready to use white liquid, it is designed to improve the quantities of site-batched cementitious mortars and slurries. Being resistant to hydrolysis, it is ideal for internal and external applications in conjunction with cement. 

Single component liquid can be easily gauged as required

Improves cohesion and workability

Improves mortars to provide waterproof repairs, renders and toppings which are highly resistant to freeze/thaw cycling

Improved tensile and flexural properties allow thin applications

Excellent bond to concrete, masonry, stonework, plaster and blockwork

Contains no chloride admixtures

Can be applied to damp substrates

With extensive knowledge and experience of our skilled professionals, we are engaged in offering a precisely formulated Nitobond SBR Latex to our clients. These are used for easy and stain free release of concrete molds and formwork of all types, especially where wooden formwork is used for de-moulding or stripping. These agents are processed adhering to industry standards and by applying quality molecular substances. Such processing helps in minimizing abrasion development and improves the performance.

Features:

Can be applied to dry or damp surfaces

High mechanical strength

Good positive adhesion

Additional Information:

• Item Code: 1726142

Nitocote EP140 coating is based on solvented epoxy resins specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces. It cures to form a smooth hygienic fi lm with good resistance to a wide range of mineral and organic acids, fats, alkalis and oils.

• Excellent adhesion - Compatible with all substrates. Can be applied directly on to mild steel and concrete
• Hygienic & Aesthetic – Forms a smooth, glossy and easy to clean surface on curing
• Chemical resistant – Proven against a wide range of industrial chemicals

• Excellent adhesion - Compatible with all substrates. Can be applied directly on to mild steel and concrete
• Hygienic & Aesthetic – Forms a smooth, glossy and easy to clean surface on curing
• Chemical resistant – Proven against a wide range of industrial chemicals

Additional Information:

• Item Code: 1751140

Renderoc SP40 is supplied as a single component, ready to use blend of dry powders and fi bres which requires only the addition of clean water to produce a highly consistent, hand and spray grade, repair mortar suitable for most structural and load bearing repairs.

• Cost effective -shrinkage control enables repairs to be completed „right first time???. Very low rebound is an additional cost benefit
• Enhanced durability -works in tandem with extremely low permeability to prolong effective working life
• Compatibility -aligns performance closer than ever before, to that of host concrete
• User friendly -specifi cally developed to provide an easyto- apply product, suitable for local conditions
• Defi nable performance -positive benefi ts are easily demonstrated via a single, simple measurement

Renderoc CS is a crack sealing cementitious material in powder form. It is easy to apply and can be finished or smoothened off with a putty blade or a damp sponge.  It sets quickly on application and can be over coated with common paints / coatings.

Renderoc CS  is used for sealing cracks on plaster, masonry and concrete substrates.

•  Single component - easy to use
•  Versatile - can be used for plaster, masonry or concrete, can be painted after application
•  Non sagging - can be used for horizontal, vertical and overhead applications
•  Good adhesion - effective bonding with substrate
•  Non Shrink - shrinkage cracking eliminated 

Cold applied, high duty pavement sealant.

For the sealing and maintenance of joints in concrete roads, runways and hard standings. The excellent fuel resistance of Colpor 200 makes it particularly suitable for sealing areas where fuel and oil spillage might occur such as oil terminals, airfield hard stands and garage forecourts.

• Cold applied - no heating equipment required
• Fuel, oil and hydraulic fluid resistance
• Tough rubbery seal, tolerant of climatic variations
• Improved sealing efficiency - less maintenance
• High movement accommodation
• Two grades (pouring - self levelling and gun grade)

Hydroproof Xtra is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane.

Non - toxic, non-fl ammable and user friendly

Provides a tough, impermeable waterproof membrane

Can be applied by brush, on horizontal and vertical surfaces

Excellent adhesion to concrete and masonry surfaces

Protects concrete and mortar from natural elements such as wind, rain, sunlight

Breathable - allows inside water vapour to escape

Available in :

1 Ltr

5 Ltr

20 Ltr

Additional Information:

• Item Code: 1638120

Nitobond AR
Nitobond AR is a modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external application.

Single component gauged as required.

Simply brushed onto concrete as a primer.

Provides excellent bond to concrete, masonry, stonework, plaster and block-board.

Improves tensile and compressive properties. Allows thin section applications.

Compatible with all common hydraulic cements.

Suitable for use in Middle East conditions. Used as a curing membrane.

Is economical in use.

Nitobond AR is a modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external application.

Single component gauged as required.

Simply brushed onto concrete as a primer.

Provides excellent bond to concrete, masonry, stonework, plaster and block-board.

Improves tensile and compressive properties. Allows thin section applications.

Compatible with all common hydraulic cements.

Suitable for use in Middle East conditions. Used as a curing membrane.

Is economical in use.

Keeping track of latest market development we are devotedly engaged in offering the wide gamut of Nitobond AR. It is a modified acrylic emulsion which is specially designed for use as a bonding aid, curing agent and gauging liquid for cementitious systems. It is resistant to hydrolysis and can, therefore, be used for external application.

Features:

Single component gauged as required

Simply brushed onto concrete as a primer

Provides excellent bond to concrete, masonry, stonework, plaster and block-board

Additional Information:

• Item Code: 1703012

Nitomortar S is a high strength epoxy mortar, based on a high quality solvent-free epoxy resin system. The special silica aggregates provide high strength and excellent abrasion resistance.
Nitomortar S is a three-component material supplied in pre-weighed quantities ready for on-site mixing and use.

High ultimate strength — suitable for structural use

Early development of strength minimises disruption

Abrasion-resistance — suitable for heavily trafficked areas

Highly resistant to a wide range of chemicals

Cured product is highly impermeable to water when ‘tight trowel’ finished

Typically twice as strong as good quality concrete

Pre-weighed components ensure consistency

Our reputation in the market is largely attributable to our precisely formulated Nitomortar S. Easy to apply non-toxic and reliable, these offered products could be purchased form us at highly reasonable costs. More to this, these are well tested before getting delivered at the destination of our customers to maintain their flawlessness.

Features:

Low, medium and high build solutions

Rapid cure solutions

Self-compacting solutions

Additional Information:

• Item Code: 1925020

Nitoproof 100 is a low viscosity blend of selected bitumens in solvent which dries to form a high quality tough bitumen film.

• Single component.
• Easily and inexpensively applied.
• Resistant to most naturally occurring chemicals.
• Does not taint water.
• Can be applied to damp concrete substrates.
• Quick drying.
• Excellent adhesion to most common building substrates.
• High coverage rates.
• Excellent water retention for use as a curing compound.
• Tough.
• Successfully used for over 30 years in a wide range of environments including Middle East.

• Quick results
• Very effective
• Long shelf life
• Nitomortar S

Additional Information:

• Item Code: 1922000

Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability.

For larger repairs, the mixed Renderoc RG Spl may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
• Can be pumped or poured into restricted locations.
• Fluidity to allow for placement without vibration.
• Pre-bagged to overcome site-batched variations.
• Rapid strength gain to facilitate early reinstatement.
• High ultimate strengths and low permeability of cured repair.
• Contains no chloride admixture.

Additional Information:

• Item Code: 2228000

Renderoc Plug provides an initial set time of approximately one minute.

• Emergency water-stopping capability.
• Single component - only the addition of clean water is required.
• Excellent bond to the substrate.
• Low exotherm minimises thermal cracking.
• Pre-bagged formulation to overcome variations in site batching.
• Contains no chloride admixture

• Nonpungent odor
• Balanced pH value
• Safe to use

Additional Information:

• Item Code: 2222003

Renderoc FC cementitious, polymer modified, fairing coat is designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated.
Renderoc FC is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The material has good handling characteristics, while minimising water demand.The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings. 

• Compatibility with non-structural concrete of compressive strength 20 - 35 MPa
• Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides
• Excellent bond to concrete
• Can be applied quickly and efficiently
• One component, pre-bagged to overcome site-batched variations
• Contains no chloride admixtures

Nitoseal PU280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self levelling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree of flexibility.
Nitoseal PU280 is available in a range of attractive colours with a separate colour pack providing visual mixing control.

Load bearing for support of arises under heavy wheel load

Good resistance to chemicals and hydrocarbon fuels

Excellent adhesion without primer to dry clean concrete

Pouring grade ensures ease of placing

Suitable for use in wide joints

Self levelling to produce uniform and neat joints

Suitable for use in Middle East conditions

With the hard-earned experience of our deft professionals, we are engaged in offering a precisely composed range of Nitoseal PU 280 Mint Green. It is two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self-leveling and can be poured directly into horizontal joints to form a tough resilient seal possessing a limited degree of flexibility.

Features:

Load bearing for support of arises under heavy wheel load

Good resistance to chemicals and hydrocarbon fuels

Excellent adhesion without primer to dry clean concrete

Additional Information:

• Item Code: 1993090

Backed by rich industry knowledge, we are engaged offering finest quality Nitobond AR Standard that is used for improving and bonding floor toppings, renders, and mortars, damaged or spelled concrete and polymer modified floor screeds. In addition to this, the offered product is inspected to ensure its effectiveness, effectiveness, purity, and quality.

Features:

Simply brush onto concrete as a primer. Single component, gauged as required

High adhesion: Provides excellent bond to concrete, masonry, stone work plaster and block board

Increased strength Improves tensile and flexural properties of mortar. Allows thin section applications

Additional Information:

• Item Code: 1703500

Nitoproof 600 single component pitch modified polyurethane cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. It is supplied in a single grade to meet all site application methods and requirements. Nitoproof 600 is a medium viscosity grade (approximately 600 poise) for roller, squeegee or spray application to horizontal and vertical surfaces.

One component; ready to apply direct from the can.

Liquid application means details are simplified and there are no joints in the membrane.

Highly elastic, cures to give a permanently fl exible resilient barrier over a wide range of temperatures.

Rapid installation; signifi cantly reduces time spent on preparatory works and detailing

Excellent adhesion, can be applied to a wide range of substrates. Continuous adhesion prevents lateral migration of water.

Impervious - outstanding barrier properties ensure protection against corrosive soil conditions.

Thermally stable - irreversible chemical cure eliminates melting and fl ow at high temperature.

Excellent resistance to oxidation and embrittlement.

Mechanical damage to the membrane can be easily repaired by spot application.

Renderoc CF is a crack sealing/filling cementitious material in powder form. It is easy to apply and can be finished or smoothened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings. 

Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals. 

Renderoc CS is used for sealing cracks on plaster, masonry and concrete substrates.About 30 RM for a V groove crack of 6mm x 6mm for 1 kg.pack. The actual coverage may vary depending on the substrate conditions.

Auramix 350 is a unique combination of new generation super plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerably reduces the water demand in fl owable concrete. It is supplied as a light brown liquid, instantly dispersible in water.

Auramix 350 disperses the cement particles effectively in the concrete mix and hence exposes a larger surface area to the hydration process. This effect is used either to increase the strength or to produce high workability concrete or reduce cement content of concrete or to retard the setting time of concrete.

• Low viscosity admixture suitable for pumping different gradesof concrete to greater heights.
• Suitable for concrete having cement replacements and low water cement ratio.
• Provides higher strength without increase in cement content or reduction in workability. Ideal for precast concrete production.
• Reduce rate of workability loss normally associated with super plasticiser. Reduces shrinkage cracking because of lower water cement ratio. Makes the concrete water impermeable.
• Better resistance to Carbonation.
• Reduce Shrinkage and Creep.
• Increase Durability.

Concure WB is a water based concrete curing compound based on a low viscosity wax emulsion. It is supplied as a white emulsion which forms a clear film on drying.
When first applied to a fresh cementitious surface the emulsion breaks to form a continuous, non-penetrating white coating.
This dries to form a continuous clear film which provides a barrier to moisture loss, ensuring more efficient cement hydration, improved durability and reduced shrinkage.

Improved curing of concrete enhances cement hydration and provides a more durable concrete

Control of moisture loss improves surface quality, reducing permeability, producing a hard wearing, dust-free surface and minimising potential for surface cracking and shrinkage

Fugitive colour provides visual guide during application

Water based, therefore, non-flammable

Spray application reduces labour costs and eliminates the need for alternative curing systems

Nitoseal PU40 is a one part, low modulus gun-grade elastomeric sealant based on polyurethane technology. Nitoseal PU40 may be applied to joints between 5 and 35mm wide. To minimise stress imposed on the joint sealant, all moving joints should be designed to an optimum width to depth ratio of 2:1 with an overriding minimum depth of 5mm for non-porous surfaces and 10mm for porous surfaces. For joint widths exceeding 35mm, please contact your local Fosroc Technical Service Department.

• Adhesion to most common building materials
• Single component with fast rate of cure
• Easy to apply
• UV resistant
• Primerless for most applications (see "Priming")
• Available in a range of colours
• ISO11600:2002 Type F 25LM compliant

Nitoflor Hardtop Standard is quality controlled, factory blended powder which are ready to use on site. They contain special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size. These latter considerations, together with the use of high performance workability admixtures, produces a material which is easy to trowel into the surface of fresh, wet concrete. Nitofl or Hardtop Standard cure monolithically to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin ‘granolithic’ screeds, viz., shrinkage, cracking, etc., are completely overcome.

Being non-metallic, Nitoflor Hardtop Standard provide a non-slip surface which will never rust and disintegrate.

• Non metallic - does not rust or stain.
• Provides a hard, abrasion resistant surface
• Forms monolithic bond with base concrete
• Easy and economical to apply

• 25 Kg

Additional Information:

• Item Code: 1853282

Nitobond EP is based on solvent-free epoxy resins containing pigments and fine fillers. It is supplied as a two-part material in pre-weighed quantities ready for onsite mixing and use.
Coloured components, white base and green hardener, provide visual evidence that adequate mixing is achieved.

• Can be applied to dry or damp surfaces
• High mechanical strength
• Good positive adhesion
• Can be applied where a substrate/repair barrier is required
• Standard and slow set grades

• Excellent bonding strength
• Accurate composition
• Easy to use

Additional Information:

• Item Code: 1711402

Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability.

For larger repairs, the mixed Renderoc RG Spl may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.

• Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
• Can be pumped or poured into restricted locations.
• Fluidity to allow for placement without vibration.
• Pre-bagged to overcome site-batched variations.
• Rapid strength gain to facilitate early reinstatement.
• High ultimate strengths and low permeability of cured repair.
• Contains no chloride admixture.

Nitozinc Primer is supplied as a two component system based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid.

• Anti corrosive - Active 'Zinc-rich' system combats corrosion by electro chemical means.
• Two component product - Easy to mix and use.
• Timesaving - Touch dry after 30 to 45 mins.
• Excellent adhesion - Exhibits excellent bond strength in cementitious repairs.

• 1 Ltr.
• 5 Ltr.

Additional Information:

• Item Code: 1958230

Plasticised expanding admixture for cement slurry and grout

Uses

Cebex 100 is an admixture for cementitious grouts where a reduced water/cement ratio and positive expansions are required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.