Dekguard S coating protects atmospherically exposed reinforced concrete structures and other cementitious substrates and masonry from attack by acid gases, chloride ions, sulphates, oxygen and water.
Dekguard S is suitable for use on all types of structures, especially those in aggressive marine and coastal environments. It is equally suitable for new and existing structures.
Dekguard S is a component of Fosroc’s Renderoc system of concrete reinstatement.
Nitocote EP140 coating is based on solvented epoxy resins specially formulated to provide a durable coating suitable for application to both vertical and horizontal surfaces. It cures to form a smooth hygienic fi lm with good resistance to a wide range of mineral and organic acids, fats, alkalis and oils.
Nitocote EP405 is a high build epoxy coating, non-toxic for application to damp surfaces.
It is a two-part, solvent free, epoxy resin material, supplied in pre-measured quantities ready for site mixing and use.
Nitocote ET550 is a thixotropic, tar extended, two pack epoxy formulation, containing inert, reinforcing fillers and a special blend of solvents. It is supplied in pre-measured quantities ready for site mixing and use.
Nitocote SN522 is a single component, penetrating silane-siloxane which penetrates into porous substrates and then reacts to produce a bonded water repellent lining. Although allowing water vapour to escape from the substrate, it significantly reduces the absorption of water and water-borne salts.
Nitocote UR512 is a two component, pigmented, aliphatic polyurethane coating possessing good resistance to long term exposure of UV rays and chemical attack.
Nitozinc Primer is supplied as a two component system based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid.
Nitozinc Primer is supplied as a two component system based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid. Nitozinc Primer is recommended for priming exposed steel reinforcement for use with Fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Nitozinc Primer is compatible with all Renderoc mortars and fluid micro concretes.
|Product Type||Nitozinc Primer|
|Model No||Nitozinc Primer STD 5|
Nitocote VF is a thixotropic, solvent free, three component compound based on epoxy resins, graded fi llers and thixotropic agents. It is applied directly to concrete for fi lling cracks, blow holes etc., which cures to a surface ready for subsequent coatings.
Dekguard Primer is a waterproofing coating based on silane-siloxane for concrete, mortar, brick and natural or artificial stone. It provides a liquid water repellent surface.
Dekguard Primer is also the recommended primer for Dekguard S system, a high performance protective and decorative acrylic coating for concrete and mortar.
Dekguard Primer penetrates onto the substrates, does not stain, inhibits the passage of water and water-borne contaminants, minimizes efflorescences, allows substrate transpiration and is resistant to atmospheric pollutants.
Our Nitocote Wall Guard is a water based polymer coating composed of high quality acrylic polymer, with weather resistant pigments. The company shares glorious credentials with the successful Suppliers of Nitocote Wall Guard from Goa. The Nitocote Wall Guard we make available comes with properly selected and graded fine fillers. Our Wall Guard is used as a waterproofing and decorative coating for protection of exterior walls of the buildings from heavy rains and winds.
For injecting into cracks in concrete or masonry to form a permanent bond or seal