ASC Tradex

Ready to use non-shrink, cementitious micro concrete
 Uses
 SikaRep® Microcrete-4 is mainly recommended for the repair of damaged concrete structures e.g.

Columns

Beams

Slabs, etc.

It is also recommended for grouting of large gaps.

Consumption ~2000 kg of powder/ cubic meter of concrete
 
 
 

1. SikaChapdur provides a hard wearing, mineral dry shake topping for monolithi floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, wear resistant smooth surface.
2. Typical uses are in warehouses, factories, shopping malls, public areas, restaurants and museums. 

• Advantages                                                                                                          
• Cost effective surface hardener. 
• Easy cleaning 
• Dust proof 
• Increased resistance to oils and grease
• Good wear resistance rating.

Low viscocity epoxy resin with long potlife for crack injection

Uses

As an injection resin with good adhesion to dry concrete, mortar, stone, steel and wood. Sikadur®-52 is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures.

Sika®CemCrete when used in combination with cement improves the shortcoming of plain cement. Sika®CemCrete acrylic polymer enhances the properties of cement slurry/ mortar/concrete making them excellent choice for use in new construction as well as renovation work

Sika ® Polysulphide is a cross linking polysulphide based elastic sealant for verticaland horizontal expansion joints.It is used in both vertical and horizontal expansion joints in many types of buildingsand civil engineering constructions such as :„ Retaining walls„ Underpasses and tunnels„ Precast concrete elements„ Bridges„ High and low rise buildings and„ Wherever a permanently flexible seal is required„„„„„„Easy to useEconomicalExcellent adhesion with many materialsNon- sag in vertical and overhead jointsGood chemical resistancePermanently elasticTestsApproval / StandardsConfirms to : BS 4254 – 1983Confirms to : BS 5212 - 1990Confirms to : IS 12118 ( part 1 & 2 ) – 1987Confirms to : ASTM C – 920 – 1987 Type M Grade NS Class 25Product DataFormAppearance/Colour grey ,pastePackaging 4 kg (Component A = 3.68 Kg, Component B = 0.32 kg )

Two component, low solvent, zinc rich epoxy resin based primer for steel

SIKA FLOOR 264 HC 

Sikadur®-31(IN) is a solvent-free, moisture tolerant, thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40°C.

Uses As a structural adhesive for:

• Concrete elements
• Hard natural stone
• Ceramics, fibre cement
• Mortar, Bricks, Blocks, Masonry etc.
• Steel, Iron, Aluminium
• Wood
• Polyester, Epoxy
• Glass

As a fast setting repair mortar for:

• Corners and edges
• Hole and void filling
• Joint arises
• Joint filling and crack sealing:
• Rigid joint filling
• Crack filling and seali

Elastic PU-Injection resin for permanent watertight sealing

Sika® Injection-201 IN is a very low viscous, elastic and solvent-free polyurethane injection resin. In contact with water, a uniform, closed and therefore watertight pore structure forms, which is elastic and flexible.

Sikaflex® Construction+ is a 1-component, moisturecuring,elastic joint sealant.
USESSikaflex® Construction+ is designed for movement and connection joints in concrete facades.