Send SMS
Send E-mail

Grouts and Anchors

Pioneers in the industry, we offer conbextra ep75, lokfix p, lokfix s, conbextra at, conbextra gp1 and conbextra ep10 from India.
Get CALLBACK

Conbextra EP75

Conbextra EP75
 
Ask For Price
Product Price:  Get Latest Price

Conbextra EP75 is a solvent free epoxy resin grout designed for grouting of gap widths of 10 to 75 mm. It is supplied as a three component system consisting of base, hardener and specially graded aggregate. The components are supplied in the correct mix proportions designed for whole pack mixing on site.
  • Creep resistant -to Improve resistance to deformation under constant loading.
  • Excellent durability - high compressive, flexural and tensile strengths ensure a long working life.
  • Cost effective - high early strength gain promotes minimum downtime and early commissioning of plant.
  • User friendly - simple, full pack mixing to ensure that the performance characteristics are achieved.
  • Versatile - suitable for a wide range of loading situations including repetitive dynamic loads.
  • Excellent in service performance - non-shrink capability ensures full surface to surface contact.

As an acclaimed enterprise of the industry, we are involved in offering a broad range of Conbextra EP75. This is a solvent free epoxy resin grout designed for grouting of gap widths of 10 to 75 mm. It is supplied as a three component system consisting of the base, hardener, and specially graded aggregate. The components are supplied in the correct mix proportions designed for whole pack mixing on site.

Features:
  • Quick response
  • Precise composition
  • Highly effective

Additional Information:
  • Item Code: 1165002
Yes! I am Interested
Get CALLBACK

Lokfix P

Lokfix P
 
Ask For Price
Product Price:  Get Latest Price

Lokfix is a two-component polyester resin anchoring grout, meeting the requirements of BS EN 1504-6: Anchoring of reinforced steel bars.
Supplied in pre-measured quantities, the material cures quickly to give consistent, high performance anchorages.
Lokfix P : Thixotropic grade, 25 minute gel at 20°C for use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar. The thixotropic nature of Lokfix P reduces flow of grout out of the hole.
  • Rapid strength gain.
  • Vibration resistant.
  • Corrosion resistant.
  • Non-expansive.
  • Can be placed underwater

To meet diverse requirements of our prestigious clients, we are engaged in providing an excellent range of Lokfix P that is extensively used for installation and anchoring of steel bars, barriers, starter bars, base plate bolts and so forth. It has remarkable strength and fixes rapidly. It can be also used for underwater applications and is offered in two grades for vertical as well as horizontal use. It is available at reasonable prices.

Features:
  • Precise composition
  • No side effects
  • Longer shelf life

Additional Information:
  • Item Code: 1663010
Yes! I am Interested
Get CALLBACK

Lokfix S

Lokfix S
 
Ask For Price
Product Price:  Get Latest Price

Available in : 0.5 Ltr, 2.5 Ltr.
  • Lokfix is a two component polyester anchoring grout supplied in pre-measured quantities.
  • The material cures quickly to give consistent, high performance anchorages.
  • Version: Lokfix S25 - Blue lid
  • Pourable grade, 25 minute gel time at 20°C for use in vertical down holes where the hole is 8 to 40 mm greater in diameter than the bar.
Advantages:
  • Easy to mix and apply
  • Rapid strength gain
  • Vibration resistant
  • Corrosion resistant
  • Non-expansive
  • Can be placed underwater
  • Increased flowability
  • Two grades specifically for vertical and horizontal / overhead use
Disclaimer: All visual elements of a product like color, texture, finish, pattern, design, shape, size, dimension and other such, as listed and displayed on www.buildmantra.com via image(s) and other multi-media content may differ from the actual due to variances in the type and quality of user's viewing screen/display monitor.All product data provided on www.buildmantra.com are for knowledge purposes only. It is liable upon all those who use, handle or install any product listed on www.buildmantra.com to adopt safe product handling practices. Build Mantra is not liable for any injury /damage to any person /property /object /entity caused by the performance or non-performance of any product listed on www.buildmantra.com.. Specification
  • Lokfix S: 0.5 liter
  • The pack consists of a can of resin and a plastic bag of hardener contained in a plastic mixing pail with a snap-on lid.
  • Store in accordance with the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972.
  • Shelf life of 12 months at 20°C will be reduced at higher temperatures.
Uses
  • Lokfix mix and place anchoring grouts are used for anchoring of steel bars into concrete, brickwork, masonry and rock.
  • Recommended applications include:
  • Installation of starter bars
  • Base plate bolts
  • MOT Bolts
  • Installation of balustrades
  • Installation of barriers and safety fences
  • Installation of tie bars
Warranty
  • Store in accordance with the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972.
  • Shelf life of 12 months at 20°C will be reduced at higher temperatures.
Installation Instructions
  • Lokfix S25
  • Using the calculated volume of grout based on the estimating guide table, the grout should be poured steadily into the prepared holes.
  • The anchor bar is then pressed into the hole to the required depth; slight agitation will assist in achieving a complete bond.
  • The bar should be left undisturbed in the required position until the resin is set.

Additional Information:
  • Item Code: 1667000
Yes! I am Interested
Get CALLBACK

Conbextra AT

Conbextra AT
 
Ask For Price
Product Price:  Get Latest Price

Description:Conbextra AT is a ready to use dry powder supplied in 25kg bags. Conbextra AT has been formulated specifically for grouting of bridge bearings and parapet post base plates. The addition of a controlled amount of clean water produces a free-flowing grout with high early and ultimate strengths as well as long term durability, suitable for use in section thicknesses 10mm to 100mm. Thicker sections can be achieved by incorporating clean, dry 10mm aggregate.
  • Non-shrink
  • High early and ultimate compressive strengths
  • Good flow
  • Low permeability ensures durability
  • Can be poured or pumped
Yes! I am Interested
Get CALLBACK

Conbextra GP1

Conbextra GP1
 
Ask For Price
Product Price:  Get Latest Price

Conbextra GP1

DescriptionConbextra GP1 is a non-shrink, free-flow, high strength cementitious grout. Machine base plate grouting - turbines, generators, pumps, presses, steel rolling beds, production machinery and crane rails. Construction grouting - stanchions, coloumns, beams, bolt pockets, keyways and anchors0. Aquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals.UsageHigh early and ultimate strength Free Flow Shrinkage compensation in plastic state Non metallic iron content Prepacked materialAdvantages
  • Non-shrink - Will continue to occupy the filled space without shrinkage. Continues to provide support to the bearing areas and dampens vibration.
  • Free flow - Ensures high level of contact with load bearing area. Also helps complete filling without voids. No need for external aids like rodding, poking, chaining etc.
  • Pre-packed and factory controlled - Consistency and reliability ensured. Site batching and blending variations eliminated.
  • Iron free - No chance of deterioration by uncontrolled rust expansion, corrosion and staining of grout.
  • Chloride free - Does not cause corrosion of machine parts, anchor bolts etc., in contact with grout.
Yes! I am Interested
Get CALLBACK

Conbextra EP10

Product Price:  Get Latest Price

Conbextra EP10 is an epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN 1504-6 Anchoring of reinforcing steel bar.It is used for grouting of gap thicknesses from 0.25 to 10 mm under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical spillage may occur. .Advantages:
  • Low creep characteristics under sustained loading
  • Resistant to repetitive dynamic loads
  • Non-shrink, ensuring complete surface contact and bond
  • High compressive, tensile and flexural strengths
  • Fast, convenient installation with rapid strength gain
  • Withstands a wide range of chemicals
Clients can avail from us an extensive array of Conbextra EP10. The offered product is used for filling cracks in brickwork at construction sites. This product is processed using quality tested chemicals by a team of skilled professionals at vendor's end. Our offered range of chemical is available in varied quantities at market leading prices.

Features:
  • Provide smooth surface
  • Non-hazardous
  • Having high bond strength

Additional Information:
  • Item Code: 1158002
 
Ask For Price
Yes! I am Interested
Explore More Products
Get Best Quote
Get Best Quote
Get Best Quote
X
Find Us Rajat Sehgal (Sole Owner) No. 4647/2, First Floor, Ajmeri Gate, Delhi - 110006, Delhi, India
SEND SMS
SEND E-MAIL
Share Us: