ASC Tradex

MasterEmaco S 346 micro concrete pourable mortar is a dual shrinkage compensated, high flow, high strength formulation for structural concrete repairs. MasterEmaco S 346 is suitable for placing in thicknesses of 25mm to 200 mm. MasterEmaco S 346 provides a durable, strong structural repair fully compatible with host concrete.

BASF MASTER SEAL 551 AVAILABLE

BASF MASTER EMACO SBR2 AVAILABLE

One component polyurethane injection foam to stop small to mid-volume water ingress

Fields of application

• Stopping of small to mid-volume water ingress in underground structures
• Also suitable for filling of water bearing voids

High strength epoxy bedding and repair mortar

RECOMMENDED USES

• Bedding of bridge beams or steel bridge bearings
• Repairing surface defects in concrete in horizontal, vertical and overhead applications
• Fining of injection ports for MasterInject resins
• Bonding of dowels, bolts and anchors into concrete
• Rapid structural repair of concrete
• Repair of concrete posts in situ

Non-shrink, cementitious grout for use in general civil engineering works

MasterFlow 718 is a ready to use, non-shrink, natural aggregate cementitious grout for use in general civil engineering works. MasterFlow 718 provides extended working life and high early and ultimate strengths.

RECOMMENDED USES

MasterFlow 718 is recommended for:

• stanchion baseplates and columns;
• prefabricated concrete panels and beams;
• bridge bearing plates;
• anchor bolts and bars;
• underpinning;
• patch repair works.

CEMENTITIOUS POLYMER MODIFIED TILE FIXING ADHESIVE

RECOMMENDED USES

• Tile on tile for cement tile only
• New tiling in internal areas & floors in external
• Ceramics and decorative cladding
• Showers & wet processing areas
• Laboratories, hospitals, canteens, etc.
• Tiling corridors, pavements and roofs

Masterflow 410 is a solvent-free low exotherm, filler extended grout, based on modified epoxy resin and is designed for use as a precision, heavy duty chocking grout for engineering applications. It is supplied as a three component system consisting of epoxy resin, combined with inert fillers and the hardener, to produce a high viscosity flowable liquid grout suitable to fill gaps or voids.

MasterTop 100 is a pre-mixed powder designed to be applied as a dry shake over freshly floated concrete floor. MasterTop 100 creates an aesthetically pleasing, coloured floor with significantly improved abrasion resistance. It is based on selected hard wearing mineral aggregates blended with alkali and light fast pigments and hydraulic binders. MasterTop 100 is available in various standard colours.

Low viscocity epoxy resin with long potlife for crack injection

 Recommended Uses

• Stabilised cracks in structural members
• Sealing of cracks from 0.1mm to 10mm
• Unfilled voids behind tiles or stone facades
• Bonding of steel plates to concrete
• Rapid structural repair of concrete
• Grouting dowels

Estimating Data

Usage will depend on the injection pressure and the size of the cracks and is impossible to estimate.

MasterSeal 911 is a one component adhesive, based on a modified silane polymer used to secure the MasterSeal 910 swelling gasket to all common substrates in construction.

Ready to use, Non-Shrink, cementitious, micro-concrete for concrete repairs

MasterEmaco S 340 micro concrete pourable mortar is a high flow, high strength formulation for structural concrete repairs and for general purpose repairs MasterEmaco S 340 is suitable for placing in thicknesses of 25mm to 200 mm. MasterEmaco S 340 provides a durable, strong structural repair fully compatible with host concrete.

RECOMMENDED USES

MasterEmaco S 340 is the ideal material for vertical or horizontal structural repairs where the thickness of repair is more than 25mm and use of pourable mortar is preferable to hand or machine applied repair systems. Typical applications are:

• Extensive repairs to beams, columns and other structural elements
• Repair of structural members subjected to repetitive loading
• Jacketing of beams, columns and other structural elements for strengthening

CURING

MasterEmaco S 340 should be cured after formwork removal by MasterKure 181

ESTIMATING DATA

Each bag of MasterEmaco S 340 when mixed with 3.5L

Solvent free long potlife epoxy bonding agent

RECOMMENDED USES

• Structural bonding of new to old concrete
• Steel bonding
• Grouting dowels

ESTIMATING DATA

Priming: coverage 2-2.7m²/Kg depending on profile of concrete.

MasterSeal joint sealing system consists of two products MasterSeal 930 and MasterBrace ADH 2200 epoxy.
The MasterSeal 930 is a highly elastic, rot-proof and chemically resistant sealing membrane.
MasterBrace ADH 2200 is a two part epoxy
compound which establishes a strong bond to
various types of substrate.

MasterEmaco S 466 micro concrete pourablemortar is a dual shrinkage compensated, high flow,high strength formulation for structural concreterepairs.MasterEmaco S 466 is suitable for placing inthicknesses of 25mm to 200 mm.MasterEmaco S 466 provides a durable, strongstructural repair fully compatible with hostconcrete.RECOMMENDED USESMasterEmaco S 466 is the ideal material forvertical or horizontal structural repairs where thethickness of repair is more than 25mm and use ofpourable mortar is preferable to hand or machineapplied repair systems. Typical applications are:??? Extensive repairs to beams, columns and otherstructural elements??? Repairs to piers, navigation locks, damsseawalls and other marine structures??? Repair of structural members subjected torepetitive loading??? Repairs to bridges, tunnels, garages, silos etc??? Jacketing of beams, columns and otherstructural elements for strengtheningFEATURES AND BENEFITS??? Dual shrinkage compensated - Volume stablein wet and hardened state reducing crackingtendency??? One component, factory made only additionof water - Uniform predictable performanceeven in remote situations??? No bonding agent required - Simpleinstallation??? Impermeable to aggressive element: long liferepairs??? Pourable mortar - Able to repair complexprofiles easily??? Fast and easy placing - Reduced time forrepairsPROPERTIESAppearance Grey powderWater

MasterPel 760 is a crystalline powder admixture for concrete to achieve high resistance to water ingress. It is based on a blend of Portland cement, processed silica sand and special catalytic agents which converts hydration by-products to solid crystalline formation in the water transporting capillary tracts and hydration pores.

TECHNONICOL 65 CONSTANT professional sealing foam is used for sealing, heat and noise insulation joints, cracks, spaces, assembly of parts in construction and finishing work.

Two Part Polysulphide Based Joint Sealant

Uses

• Residential and commercial buildings.
• Curtain walls, precast concrete paneling.
• Factories and warehouses.
• Dams, reservoirs and water treatment plants.
• Subways, bridges, culverts and rigid pavements of Highways, airport runways etc

Plasticised expanding admixture for cement slurry and grout

RECOMMENDED USES

• Cable duct grouting
• Cavity filling
• Filling gaps between precast elements
• Repairing honeycombs by pressure grouting
• Site batched repair/reprofiling mortars
• Filling up the plumbing & electric chases

ESTIMATING DATA

MasterFlow 150 is used at the rate of 500gm per 100kg cement.

Vegetable Oil based, ready-to-use, form-release agent

Chemical release agent suitable for mould and shutter faces prior to casting concrete in order to achieve a clean release. After removal of the formwork, the resultant concrete has a smooth hard uniform finish, with reduced incidence of blow holes. MasterFinish 202IN can be applied to the formwork by spray in the form of a light uniform mist coating.

RECOMMENDED USES

• Prestressed, precast, and pipe plants
• RCC structures

MasterFinish 202 is well suited for shutter faces made from wood, steel, fibreglass, aluminium & paper.

MasterFinish 202 reacts chemically with cement to impart excellent release properties to treated surfaces. Concrete cast against surfaces coated with MasterFinish 202 exhibit a smooth, hard, uniform finish.

Versatile, solvent free, nail free fixing, construction adhesive

Recommended Uses 

• MasterWeld 303 has been developed
• specifically for interior bonding of wooden
• thresholds, door frames, profiles, panels,
• ornaments, decorative trims.
• For bonding chipboards and uPVC on
• brickwork, stone or concrete.
• Also suitable for EPS and XPS polystyrene foam.
• Can be used as a crack filler prior to painting.

One part polyurethane based elastomeric joint sealant

RECOMANDED USES

MasterSeal NP 472 has been developed specifically for sealing dynamically moving joints such as; expansion and control joints.

MasterSeal NP 472 demonstrates high elasticity and recovery properties and therefore may be used to bond and seal most common building materials including concrete, glass, wood, stone, metal and anodised aluminium. In addition

MasterSeal NP 472 has excellent tear resistance and good weathering characteristics.

MasterBrace 4500 is a 100% solids long pot lifeblue pigmented epoxy resin for saturation ofMasterBrace fibre sheet to form insitu FibreReinforced Polymer composites.
RECOMMENDED USES¿¿¿ MasterBrace 4500 is used to saturate theMasterBrace carbon, glass or aramid fabricsheets to create a composite with thestructure¿¿¿ MasterBrace composites can be used toincrease flexural, shear, and axial loadcapacity¿¿¿ Increased impact resistance and to provideblast mitigation¿¿¿ Reduction of crack propagation andincreased resistance to fatigue

Liquid cold-applied waterproofing membrane system

RECOMMENDED USES

Waterproofing exterior, below grade concrete and between concrete slab applications.

ESTIMATING DATA

Wet Film Thickness @ 1.65mm = 0.6m2/liter Coverage per 18.93 liters is approximately 11.6m².

MasterSeal M 635 is a single component, liquid applied polyurethane based, elastomeric coating for roof waterproofing.
RECOMMENDED USES
- Applicable for outdoor use
- Can be applied on concrete and cement mortar.
- Waterproofing of roofs, balconies and terraces.

Solvent free long potlife epoxy bonding agent

RECOMMENDED USES

• Structural bonding of new to old concrete
• Steel bonding
• Grouting dowels

MasterSeal 501 and MasterSeal 502 are components of BASF’s crystalline capillary waterproofing system. These products contain specialist additives that play the role of the catalyst in the formation of water-insoluble crystalline micro-structures deep within the capillaries and interstices of cementitious matrix of concrete and mortars. As the crystalline capillary waterproofing system enables effective pore sealing it does not rely on film formation on the surface and is not affected by the negative hydrostatic pressure. The system is equally effective against positive and negative water pressure or osmotic pressure. MasterSeal 501, is the most concentrated form within the BASF crystalline waterproofing system and contains the maximum amount of specialist catalysts. MasterSeal 501 can be used as a coating, dry shake or as an additive in the concrete or mortar mix.

MASTERSEAL 755 SPF is two component polyurethane resin (PUR) based foam that is applied with a specially designed spraying machine. It provides high-performance thermal insulation in Building Envelope. The product is available in two grades: Masterseal 755 SPF-40 – Nominal density ≥ 40 Kg/m3 Masterseal 755 SPF-55 – Nominal density ≥ 55 Kg/m3

Epoxy based zinc rich primer for steel

 RECOMMENDED USES

• As a protective coating to steel reinforcing bars in concrete.
• As a touch-up primer for damaged galvanized metal.
• As a primer for steel substrates prior to suitable top coating.

MasterKure 181 is a non-degrading, membraneforming liquid based on specially formulated acrylic resin suitable for curing newly placed or freshly deshuttered concrete; assists in the retention of water during hydration. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks. Additionally, the membrane acts as a primer system for many subsequent surface finishes that do not rely on penetration for substrate bond. When applied to floors, the MasterKure 181seals and dustproof the surface, eliminating the primary source of abrasion and enhancing durability. MasterKure 181 is available as a clear translucent liquid and white solar reflective version.

MasterProtect 1812 is a two components, solvent free, pitch extended epoxy resin system to provide a high build coating that protects concrete and metal substrates from a wide range of aggressive chemicals

INTEGRAL WATERPROOFING LIQUID FOR CEMENT CONCRETE & MORTARS

RECOMMENDED USES

MasterPel 777 can be used in all types of concrete and mortar that is used in all types of residential, commercial and infrastructural construction. Additionally, it can be used in concrete applications constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures.

MasterPel 777 is used as a dual action admixture combining both the waterproofing cum plasticizingeffect for cement concrete, mortars and plasters.

DOSAGE.