|Packaging Size||25 Ltr|
We are providing an excellent quality array of Cebex 100Admixture Chemical to our prestigious clients at very affordable rates within committed period of time.
High-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar.
Conbextra GP is used for free flow, non-shrink, cementitious grouting of gap thicknesses 10 to 75 mm.
Can be used at flowable or trowelable consistency
Long shelf life
Available in :
Conplast AEA is a chloride free air entraining admixture based on neutralised vinson resin. It is supplied as a translucent water white coloured solution which instantly disperses in water.
Conplast AEA acts at the interface between the mixing water and cement/aggregate particles to produce microscopic air bubbles, which are evenly distributed throughout the concrete. The entrained air enhances durability by providing protection against the rapid temperature changes found in freezing and thawing conditions and with the use of de-icing salts.
Conplast NC chloride-free accelerating admixture is supplied as a light straw-coloured solution that instantly disperses in water.
Conplast NC accelerates the early stages of cement hydration, producing more rapid stiffening and allowing strength gain to commence at an earlier stage. This effect is particularly noticeable at low temperatures and is most significant in the first 24 hours after mixing.
|Packaging Size||1 Ltr. , 20 Ltr, 200 Ltr|
|Packaging Type||Bottle and Container|
Conplast RP264 is a chloride free water reducing admixture based on selected lignosulphonate materials. It is supplied as a brown solution which instantly disperses in water.
Conplast RP264 disperses the fine particles in the concrete mix, enabling the water content of the concrete to perform more effectively. The initial hydration of the cement is also delayed, resulting in a delay in the setting time of the concrete with no adverse effect on subsequent stiffening and strength gain.
|Packaging Size||20 Ltr and 200 Ltr|
Conplast SD110 chloride free admixture is specially formulated for optimum cost saving across a wide range of static and mobile (egg-laying) block paving and masonry production equipment. It is supplied as a brown solution which instantly disperses in water.
Conplast SD110 disperses the fine particles in the mix, improving cement dispersion and compaction to maximise the strength obtained from the cement used. The improved performance can then be used to allow reductions in cement content without loss of performance. Controlled air entrainment maintains yield and improves surface finish while providing improved resistance to frost attack.
|Packaging Size||20 Ltr|
Conplast SP430 is a chloride free, super plasticising admixture based on selected sulphonated napthalene polymers. It is supplied as a brown solution which instantly disperses in water.
To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix.
Particularly suitable for precast concrete and other high early strength requirements.
To significantly improve the workability of site mixed and precast concrete without increasing water demand.
To provide improved durability by increasing ultimatestrengths and reducing concrete permeability.
Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times.
Makes possible major reductions in water:cement ratio which allow the production of high strength concrete without excessive cement contents.
Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content.
Increased workability levels are maintained for longer than with ordinary sulphonated melamine admixtures.
Improved cohesion and particle dispersion minimises segregation and bleeding and improves pumpability.
Chloride free, safe for use in prestressed and reinforced concrete.
|Packing Size||250 Kg|
Conplast SP430 G8 is based on Sulphonated Napthalene Polymers and supplied as a brown liquid instantly dispersible in water.
Conplast SP430 G8 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability.
Form of Chemical:Liquid
Conplast SR is designed to provide a simple, economical method of exposing aggregates in freshly poured face-up and face-down precast concrete panels or slabs. Conplast SR retards the hydration of cement at the surface matrix of the concrete.
Conplast WP90 powder is a fine, white powder ready for use with concrete or cement mortar mixes. Conplast WP90 powder is a traditional admixture to fill natural pores within the concrete or mortar matrix to reduce porosity and improve water tightness.
|Packaging Size||20 Ltr|
Conplast X421IC is a dark brown liquid based on lignosulphonates which mixes readily with water and therefore disperses evenly.
Conplast X421IC waterproofs by improving the quality of the concrete or mortar. It reduces the water demand for required workability and minimises segregation and bleeding. Thus it is more effi cient compared to traditional powder waterproofs as its use results in two fold improvement of concrete or mortar.
|Packaging Size||1, 5,10, 20 Ltr|
|Grade Standard||Reagent Grade|
Auramix 350 is a unique combination of new generation super plasticizer based on polycarboxilic ether polymer with long lateral chain. Electrostatic dispersion mechanism considerably reduces the water demand in fl owable concrete. It is supplied as a light brown liquid, instantly dispersible in water.
Auramix 350 disperses the cement particles effectively in the concrete mix and hence exposes a larger surface area to the hydration process. This effect is used either to increase the strength or to produce high workability concrete or reduce cement content of concrete or to retard the setting time of concrete.