Send SMS
Send E-mail

Concrete Repair

We are a leading Distributor / Channel Partner of renderoc cf white, renderoc cs white, renderoc fc, renderoc hb2, renderoc hs xtra and renderoc plug from Delhi, India.
Get CALLBACK

Renderoc CF White

Renderoc CF White
 
Ask For Price

DescriptionRenderoc CF is a crack sealing/filling cementitious material in powder form. It is easy to apply and can be finished or smoothened off with a putty blade or a damp sponge. It sets quickly on application and can be over coated with common paints / coatings. UsageAquaproof Anchoring Systems is authorised project Super stockist and brushbond authorised Fosroc applicator for Fosroc Chemicals(India) in Pune, Maharashtra and a leading dealer for construction chemicals. CoverageRenderoc CS is used for sealing cracks on plaster, masonry and concrete substrates.About 30 RM for a V groove crack of 6mm x 6mm for 1 kg.pack. The actual coverage may vary depending on the substrate conditions.
Yes! I am interested
View PDF
Get CALLBACK

Renderoc CS White

Renderoc CS White
 
Ask For Price

Renderoc CS is a crack sealing cementitious material in powder form. It is easy to apply and can be finished or smoothened off with a putty blade or a damp sponge.  It sets quickly on application and can be over coated with common paints / coatings.UsesRenderoc CS  is used for sealing cracks on plaster, masonry and concrete substrates.Advantages
  •  Single component - easy to use
  •  Versatile - can be used for plaster, masonry or concrete, can be painted after application
  •  Non sagging - can be used for horizontal, vertical and overhead applications
  •  Good adhesion - effective bonding with substrate
  •  Non Shrink - shrinkage cracking eliminated 
Yes! I am interested
View PDF
Get CALLBACK

Renderoc FC

Renderoc FC
 
Ask For Price

Renderoc FC cementitious, polymer modified, fairing coat is designed for vertical and overhead use to infill honeycombing and voids up to 3 mm deep in the surface of concrete which is not trafficked and is subsequently coated.
Renderoc FC is supplied as a ready to use blend of dry powders requiring only the site addition of clean water to produce a highly consistent cementitious fairing mortar. The material has good handling characteristics, while minimising water demand.The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc mortars and Dekguard coatings. 
  • Compatibility with non-structural concrete of compressive strength 20 - 35 MPa
  • Polymer-modification provides extremely low permeability to water, carbon dioxide and chlorides
  • Excellent bond to concrete
  • Can be applied quickly and efficiently
  • One component, pre-bagged to overcome site-batched variations
  • Contains no chloride admixtures
Yes! I am interested
View PDF
Get CALLBACK

Renderoc HB2

Renderoc HB2
 
Ask For Price

Our valued clients can avail from us optimum quality Renderoc HB2. This product is suitable where above average chloride and carbon dioxide resistance is required. Due to the light weight nature of the product, Renderoc HB2 is recommended for high build repair to reinforced concrete in vertical or overhead situations where thicknesses of up to 40mm vertically or 25mm overhead can be achieved in a single application.

Features:
  • Excellent bond to the concrete substrate
  • Shrinkage compensated
  • Only addition to water at site to be made while mixing the powder and liquid parts

Additional Information:
  • Item Code: 2199000
Yes! I am interested
View PDF
Get CALLBACK

Renderoc HS Xtra

Renderoc HS Xtra
 
Ask For Price

Renderoc HSXtra is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent repair mortar suitable for structural concrete and masonry repairs. Renderoc HSXtra may be hand applied or sprayed with suitable equipment, please see application method statement for details.Renderoc HSXtra features Dimensional Stability Technology - a new materials technology which controls the rate of drying shrinkage such that, when used correctly:i. The dimensions of the repair remain stable; and thusii. Eliminating failure, due to shrinkage cracking.
  • This in turn leads to a series of associated benefits:
  • Cost effective - shrinkage control enables repairs to be completed ‘right first time’.
  • Enhanced durability – works in tandem with extremely low permeability to prolong effective working life.
  • Compatibility – aligns performance closer than ever before, to that of host concrete.
  • User friendly – specifically developed to provide an easy-to-apply product, suitable for local conditions.
  • Definable performance – positive benefits are easily demonstrated via a single, simple measurement.
Yes! I am interested
View PDF
Get CALLBACK

Renderoc Plug

Renderoc Plug
 
Ask For Price

Keeping in mind the exact needs of clients, we are offering a quality range of Renderoc Plug. It is supplied as a ready to use the blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cement, graded aggregates, special fillers and chemical additives which control the rate of set and minimize the risk of thermal cracking.
Renderoc Plug provides an initial set time of approximately one minute.
  • Emergency water-stopping capability.
  • Single component - only the addition of clean water is required.
  • Excellent bond to the substrate.
  • Low exotherm minimises thermal cracking.
  • Pre-bagged formulation to overcome variations in site batching.
  • Contains no chloride admixture
Features:
  • Nonpungent odor
  • Balanced pH value
  • Safe to use

Additional Information:
  • Item Code: 2222003
Yes! I am interested
View PDF
Get CALLBACK

Renderoc RG

Renderoc RG
 
Ask For Price

Available in : 25 Kg
Location Type: Industrial
Material Procurement:Supplier End

Renderoc RG is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability.For larger repairs, the mixed Renderoc RG Spl may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
  • Can be pumped or poured into restricted locations.
  • Fluidity to allow for placement without vibration.
  • Pre-bagged to overcome site-batched variations.
  • Rapid strength gain to facilitate early reinstatement.
  • High ultimate strengths and low permeability of cured repair.
  • Contains no chloride admixture.

Additional Information:
  • Item Code: 2228000
Yes! I am interested
View PDF
Get CALLBACK

Renderoc RG SPL

Renderoc RG SPL
 
Ask For Price

Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability.For larger repairs, the mixed Renderoc RG Spl may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
  • Can be pumped or poured into restricted locations.
  • Fluidity to allow for placement without vibration.
  • Pre-bagged to overcome site-batched variations.
  • Rapid strength gain to facilitate early reinstatement.
  • High ultimate strengths and low permeability of cured repair.
  • Contains no chloride admixture.
Yes! I am interested
View PDF
Get CALLBACK

Renderoc RGL

Renderoc RGL
 
Ask For Price

Renderoc RGL is supplied as a ready to use blend of dry powder, which requires only the site addition of clean water to produce a free-flowing, non-shrink microconcrete. The material is based on Portland cements, and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability.
           For larger repairs, Renderoc RG(L) may be modified by the addition of 5mm to 12mm clean, graded saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc office should be consulted.UsesFor economical repairs to damaged reinforced concrete elements, particularly where access is restricted and where vibration of the placed material is difficult or impossible. Suitable for various structural strengthening measures such as filling honeycombs and cracks.Advantages
  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
  • Can be pumped or poured into restricted locations.
  • Highly fluid to allow for placement without vibration.
  • Pre-packed to overcome site-batched variations.
  • Low permeability
  • Economical
  • Contains no chloride admixture.
  • Ease of use
Yes! I am interested
View PDF
Get CALLBACK

Renderoc S2

Renderoc S2
 
Ask For Price

Available in : 25.25 Kg
Renderoc S2 is supplied as a grey powder along with a liquid polymer and has to be mixed with water on site to produce a highly consistent, high strength repair mortar. The material is based on carefully blended cement, graded fillers and chemical additives and is polymer modified to provide a mortar with good handling characteristics, while minimising water demand. The hardened product exhibits excellent thermal compatibility with concrete and outstanding water requirement ensures fast strength gain and long-term durability.
  • High strength
  • Can be applied by hand, like conventional mortars
  • Extremely low permeability provides maximum protection against carbon dioxide and chlorides
  • Excellent bond to the concrete substrate
  • Shrinkage compensated
  • No site batching required, supplied in pre-weighed prepacked condition
  • Only addition of water at site to be made while mixing the powder and liquid parts
  • Contains no chlorides.

Additional Information:
  • Item Code: 2234000
Yes! I am interested
View PDF
Get CALLBACK

Renderoc SP 40

Renderoc SP 40
 
Ask For Price

Renderoc SP40 is supplied as a single component, ready to use blend of dry powders and fi bres which requires only the addition of clean water to produce a highly consistent, hand and spray grade, repair mortar suitable for most structural and load bearing repairs.
  • Cost effective -shrinkage control enables repairs to be completed „right first time???. Very low rebound is an additional cost benefit
  • Enhanced durability -works in tandem with extremely low permeability to prolong effective working life
  • Compatibility -aligns performance closer than ever before, to that of host concrete
  • User friendly -specifi cally developed to provide an easyto- apply product, suitable for local conditions
  • Defi nable performance -positive benefi ts are easily demonstrated via a single, simple measurement
Yes! I am interested
View PDF
X
Looking for “Concrete Repair”?
Find Us Rajat Sehgal (Sole Owner) No. 4647/2, First Floor, Ajmeri Gate, Ajmere Gate, Delhi - 110006, Delhi, India
SEND SMS
SEND E-MAIL